CZ Purlin Roll Forming Machine

About CZ Purlin Roll Forming Machine

Automation Grade	Automatic
Job Thickness	1-2 mm, 0.5-1 mm, 0.1-0.5 mm
Number of forming stations	16
Mandrel movement	Manually Adjusted
Total HP for Line	8
Maximum sheet width that can be formed	1250 mm
Maximum sheet thickness in CRCA Strips that can be formed	1.2 mm
Coil width	1250 mm
Horizontal distance between shafts	500 mm
Coil weight	5 MT Max
Back Tension	Manually Adjusted
Speed of the machine	10 -14 mt / mint
Coil bore	450 mm min,510 mm max dia.
Size of machine	9500 x 1700 x 1100 mm

We are involved in manufacturing accurately CZ Purlin Roll Forming Machine. These products are mainly used for structural purposes in diverse industries. The entire range is fabricated using high-quality raw materials at our modern and well-equipped manufacturing facility. We have an ability to produce bulk needs of ceiling section of the customer within the specific time frame.
Entry Gate
Entry gate will be provided for movement of the sheet to roll former.

Main Base
The main base is MS fabricated structure and adequately ribbed to minimize the distortion
It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Mill stands (Station)
The stands are mounted on the bed of the machine the line alignment can be easily done due to guideways arranged on the bed of the machine
Each forming head consists of a fixed housing and sliding type outboard housing
The mill stands will be arranged to locate shafts mounted on taper bearing
For the top shafts, the bearings are housed in the cartridge type bearing block
The bottom shaft bearings are located in the bored machined in the housing
The bottom arbors are fixed in a position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.

Roll shafts
The roll shafts dia. 70mm will be manufactured from quality steel and will be keyed to locate tooling.

Drive
The drive to the roll former will be by means of a chain. The main drive will be provided by means of 10 HP motor

Tooling
One set of Tooling with EN grade will be from imported material suitable for your machine as standard supply
The same is involved in operations like rough machining, keyway, rough profiling, profile machining and inspection with final template for above

Cutting Unit (Hydro)
Hydraulically operated power pack along with cutting die with 3 HP electrical.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Advanced Purlin Manufacturing Technology

This machine employs advanced chain drive transmission and PLC control to deliver consistent, high-quality Z and C profile purlins. Its hydraulic punching and cutting systems not only accelerate production but also maintain precise dimensions with production tolerances up to 1.5 mm. With automated feeding and computerized controls, it ensures efficient workflow and minimizes manual intervention.


Versatile and Durable Construction

Built with high grade chromed steel rollers and a sturdy frame, the CZ Purlin Roll Forming Machine is engineered for extended durability. It accommodates material widths between 100-300 mm and thickness ranging from 1.5 to 3.0 mm, making it versatile for a range of construction applications. A water-cooled hydraulic system keeps operations steady during high-volume output.